Our Tools

The CMC 356 is the universal solutionfor testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands.

Universal testing device for electricaldiagnostics / Electrical tests on transformers, current transformers, voltage transformers, grounding systems, lines and cables, and circuit breakers can be performed with the CPC 100.

The output current of the CPC 100 can be increased up to 2000 A using the CP CB2 current amplifier.

Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision.

The following values can be determined using the CT Analyzer: Accuracy of the ratio and phase angle, taking into consideration the nominal burden and connectedburden, CT excitation and saturation, Burden impedance, Winding resistance, Saturated and non-saturated inductance, CT polarity.

The following 5 standard tests can be carried out on all circuit breakers using CIBANO 500: Static contact resistance test (micro-ohm measurement), Timing tests, Coil and motor current analysis, Minimum pick-up test, Undervoltage condition test.

Full-function Test Kit (FFTK), Masterpact or Powerpact circuit breakers. Verify circuit breaker family by referring to circuit breaker label or instruction bulletin when configuring circuit breaker parameters for secondary injection testing.

The 800PL Series DC hipot testers are an economical solution to DC field testing of cables, terminations, motors, generators and other electrical apparatus. This series comes in a single unit design that ranges from 5kV to 60 kV.

Lightest weight available in air-insulated high- voltage model Advanced performance with long-term reliability provided by filtered half-wave rectification Designed for maximum operator safety High Voltage DC Dielectric Test Sets provide the most dependable, portable DC highvoltage sources for checking the quality of electrical power cables, motors, switchgear, insulators, transformers and capacitors.

High voltage Inc -PFT 503 C Only single piece, shielded cable output AC hipot rated 50 kVac @ 3 kVA. Half the size and weight ofothers and easier to use.